H12-224 Actual Questions Answers PDF 100% Cover Real Exam Questions
H12-224 Exam questions and answers
How to book the Huawei H12-224: HCIP-Routing & Switching (Fast Track) V2.0 Exam
These are the following steps for registering for the Huawei H12-224 exam Step 1: Visit Pearson VUE Exam Registration Step 2: Signup/Login to Pearson VUE account Step 3: Search for Huawei H12-224 Certifications exam Step 4: Select Date, time and confirm with a payment method
Huawei H12-224: HCIP-Routing & Switching (Fast Track) V2.0 Certification Path
It is recommended that you learn HCIA-Routing & Switching before attempting with the help of H12-224 practice exams. Huawei Certified ICT Expert (HCIE), Huawei’s highest level of ICT technical certification, is awarded to people who demonstrate especially strong expertise in ICT and rich experience in practice. Huawei Certified ICT Professional (HCIP) is awarded to senior engineers with rich ICT knowledge and strong experience in an ICT technical field. Huawei Certified ICT Associate (HCIA) is awarded to engineers who can install, configure, and run ICT devices, and rectify faults in a technical field.
NEW QUESTION 24
Which of the following LSPs are established in Downstream Unsolicited (DU) label advertisement mode and ordered label distribution control mode?
- A. lf the egress node has available labels for distribution it allocates labels for the FEC and sends a label mapping message to the upstream node
- B. After receiving a label mapping message the LSR adds the corresponding entry to the label forwarding table
- C. When the edge node finds a new destination address in its routing table that does not belong to any existing FEC the edge bode not crate
- D. An LSP is established by binding an FEC to a label and advertising the binding relationship to the neighboring LSR
Answer: A,B,D
NEW QUESTION 25
Which of the following statements about the link failure detection in STP protocol is not true?
- A. When network topology is stable, the Designated Port sends BPDU packet at every Hello Time interval.
- B. When the port does not receive new BPDU within a certain interval, the old configuration BPDU will time out and the link failure can be detected.
- C. When network topology is stable, BPDU packets will be transmitted periodically.
- D. The port sends Configuration BPDU at every Hello Time interval. When the link fails, Configuration BPDU cannot be sent out. As a result, this port can detect the link failure.
Answer: D
NEW QUESTION 26
What is the Origin attribute of the BGP route that is imported by using the import-route command?
- A. Incomplete
- B. EGP
- C. IGP
- D. Unknown
Answer: A
NEW QUESTION 27
The Per-Hop Behavior (PHB) defines the policy and priority applied to a packet when traversing a hop (such as a DS) in a DiffServ network.
- A. True
- B. False
Answer: A
NEW QUESTION 28
After an STP switch starts, it considers itself as the root switch. Which statements about BDPU parameter setting are true? (Select 3 Answers)
- A. The designated cost is 0.
- B. The switch is the designated bridge.
- C. The designated port is 0.
- D. The switch is the designated root.
Answer: A,B,D
Explanation:
NEW QUESTION 29
Which of the BGP attributes will not be advertised to other neighbor AS?
- A. ORIGIN
- B. AS_PATH
- C. COMMUNITY
- D. LOCAL_PREF
Answer: D
NEW QUESTION 30
To improve STP running stability, a network administrator wants to configure some STP features or protection mechanism on switches. Which of the following configuration roadmaps is correct?
- A. Configure BPDU protection so that the switch checks the validity of each received BPDU to prevent attacks of forged BPDUs.
- B. Configure root protection on the user access port to ensure that the user does not connect to a switch with a higher priority.
- C. Configure the user access port as an edge port to prevent the user from connecting to the switch on this port.
- D. Configure loop protection on positions where loops have occurred so that loops are always blocked.
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 31
Which of the following statements are correct regarding VRRP advertisement message?
- A. VRRP has two kinds of advertisement message, one is used for Master election, the other one is used in stable network after Master election.
- B. VRRP has one kind of advertisement message which is sent by Slave.
- C. VRRP has two kinds of advertisement message, one is sent by Master, the other is sent by Slave.
- D. VRRP has one kind of advertisement message which is sent by Master.
Answer: D
NEW QUESTION 32
The USG supports load balancing between multiple uplinks.
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION 33
Which of the following route entries matches ACL 2001 that is defined below?
- A. 1.2.3.0/24,1.2.4.0/24, 1.2.5.0/24, 1.2.6.0/24,1.2.7.0/24,1.2.8.0/24
- B. 1.0.0.0/8,1.2.0.0/16,1.2.3.0/24,1.2.4.0/24, 1.2.5.0/24, 1.2.6.0/24,1.2.7.0/24,1.2.8.0/24
- C. 1.2.0.0/16,1.2.4.0/24,1.2.6.0/24,1.2.8.0/24
- D. 1.2.3.0/24,1.2.5.0/24,1.2.7.0/24
Answer: D
NEW QUESTION 34
The import-route limit command is used to set the maximum number of external routers that can be imported into an OSPF process.
- A. True
- B. False
Answer: A
NEW QUESTION 35
QoS can provide different quality of service according to different demands, which of the following are functions of QoS? (Select 3 Answers)
- A. Providing private bandwidth for users
- B. Specifying priority of packets
- C. Reducing cost of the network
- D. Congestion management and avoidance
Answer: A,B,D
NEW QUESTION 36
On the RSTP network as shown in the figure, what is the port role of SWC E0/1 according to the configuration?(Select 2 Answers)
- A. Alternate port
- B. Root port
- C. Edge port
- D. Designated port
Answer: C,D
NEW QUESTION 37
Which is the port state defined in RSTP?
- A. Learning
- B. Forwarding
- C. All of the above
- D. Discarding
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 38
Which of the following statements about the setup of a BFD session are true? (Choose three.)
- A. Static and dynamic BFD sessions are not differentiated.
- B. A static BFD session is set up by manually configuring BFD session parameters and delivering requests for setting up a BFD session. BFD session parameters include the local and remote discriminators.
- C. A BFD session can be set up in either static or dynamic mode.
- D. A dynamic BFD session is set up by dynamically allocating local discriminators.
Answer: B,C,D
Explanation:
Explanation
NEW QUESTION 39
......
Who should take the Huawei H12-224: HCIP-Routing & Switching (Fast Track) V2.0 Exam
The Huawei H12-224 exam is for networking engineers, ICT professionals, or students interested in datacom network technologies. Huawei Certification written exam is supplied by the Pearson VUE testing service company. There have different requirements and processes for different level and technical field certification exams. With the advances of ICT technologies, Huawei certification content will be updated and optimized irregularly. Recertification can renew the validity of a certificate and ensure that certification complies with the latest development trend of ICT technologies. With the advances of ICT technologies, Huawei certification content will be updated and optimized irregularly. Recertification can renew the validity of a certificate and ensure that certification complies with the latest development trend of ICT technologies.
GetValidTest H12-224 Exam Practice Test Questions : https://braindumps.getvalidtest.com/H12-224-brain-dumps.html